So been missing your NTFS on OSX

It looks like someone have been doing something about this. Amit Singh from Google, have been working on FUSE (File-system in USErspace).

It is supposed to make is possible to read/write NTFS (and other non-supported filesystems) on OSX.

But as usual with these things it comes with a warning: "Before opening new issues, please look at the Wiki, especially the FAQ and the HOWTO articles, to see if your problem is already discussed there. It would also be helpful to look at the current and past problems reported in the 'Issues' section."

Comments

Alphast said…
I don't get it. OSX wasn't based on Linux? And isn't Linux able to read and NTFS partition? Or am I completely off?
January 22, 2007 at 9:10 PM
Casper said…
No it's based on BSD (Unix), that means that there is a limited number of filesystem it recognize. But it does not stop there - the commands are Unix, not Linux (GNU tools) which means that parameters might be diffrent, or what your are looking for in a command does not exist, and so forth. It makes life interesting for people who are used to Linux (as me).

But there are ways to change that Fink and DarwinPorts have ported a number of GNU tools to OSX, which makes life a bit easier...
January 22, 2007 at 10:25 PM
Alphast said…
OK, I understand it better then. Thanks for the explanation.
January 25, 2007 at 4:06 PM
Casper’s Life » Blog Archive » iTunesFS (w/MacFuse) said…
[...] a year ago I wrote about MacFuse, which is a great way of incorporating 3rd party filesystems into Apple OSX. One of the things iis [...]
January 2, 2008 at 7:32 PM
Post a Comment

Popular posts from this blog

Kviknet and IPv6

Image
 I decided to switch ISP, mainly due to Hiper (Danish) was using a VLAN for their connection which made pfSense and my APU3 board require a reboot everytime I changed anything. Kviknet has a good reputation (wonder why) in Denmark, they are not cheap and they have the same opening hours as everyone else - meaning until 16:30 and closed during weekends. I sometimes wonder how companies who need 24/7 internet get on with that ... well it's Denmark. Kviknet has an interesting way to do IPv6, your router get and SLAAC assigned IPv6 address on the public side (wan) and you get a ::/48 network from Kviknet to use on your lan.  To some degree it does make sense, you can then configure your lan with static addresses as you see fit, and for dynamic assignment you use RA stateless dhcp *) ... which works for everything.  (I need to get my piHole configured with an static IPv6 so that I can use that ...). pfSense is a pain, I do like it, but they are light years behind their main competitor
Read more

Apple AirPort Express and Digital Jitter..

I'm doing something which I can't really afford, but doing it anyway ... I'm upgrading my Stereo ... I like music, and  believe it should be played at the highest affordable quality. So after getting a new Stereo Amp (Creek Evolution 50A), I got a new Phono Amp. and then started looking for a DAC ... and after reading I do not know how many posts I decided to get an S.M.S.L M8 (from  Amazon  fro €249.99), not too expensive and according to what I can read very good. So I got it hooked it up to my amp, connected my Notebook (Macbook Air 11" / 2011) using USB ... sounded nice, then my Macbook Pro Retina with digital (fiber) in some way better than USB, slightly more air and openness. Then decided to use my old Apple Airport Express ( MB321LL/A  - 802.11n version 1) using it's digital output (I don't like the build in DAC - it's a bit too dark for me), and this is where I started having doubts about my buy. There was drop out, all the time. Right I changed, to
Read more

MacOS Ventura: not able to ssh to ruckus switch (diffie-hellman-group1-sha1)

 I upgrade to Ventura and replaced my Intel MacMini with an M2 MacBook Air ... everything was working, then I wanted to ssh to my Ruckus ICX 7150-C12 (08.0.95fT211), and got an error: Unable to negotiate with my-switch port 22: no matching key exchange method found. Their offer: diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 Hummm, WTF.... I've seen similar things before when you upgrade FW or OS suddenly ssh will no longer work as a protocol or cipher have been deprecated. As I do not feel like upgrading my switch I had to do something else. I found this on serverfaul t, helped to a part of the way, and then a bit more googling I found the solution, which might be overkill. I ended up adding this in my ~/.ssh/config for the switch: Host my-switch KexAlgorithms=+diffie-hellman-group1-sha1 PubkeyAcceptedKeyTypes ssh-ed25519,ssh-rsa,rsa-sha2-256,rsa-sha2-512 HostkeyAlgorithms +ssh-rsa    And now I can access my switch again. Yes, I know upgrading the firmw
Read more